|
Basic Setup
The default settings will work for most
applications. However, there are a couple settings that must be
set correctly for proper operation. From the menu, select
"Options"->"Preferences" to open the user
preferences dialog:
 |
In the
"Service / STB" area, pick your service provider and
STB model from the drop-down lists. Although the R5000-HD will
make recordings even if the wrong service provider is selected,
the streams will most likely develop errors or may even stop
completely. The "STB Model" setting is less important,
but must be properly selected for the remote control to work and
to make PVR initiated recordings.
Select a File naming Option. If "Auto-Generate" is not
selected, you will be prompted for a filename when you exit this
dialog. Be careful when choosing the setting shown here since
the same file will be recorded over each time. If you don't use
auto-generate, it is recommended that "Auo-Increment"
is enabled.
Version 2.0 adds the capability
to record to D-VHS tape. The additional "Record To:"
pull-down lets the user select the destination media for the
recording (Disk, Tape or both).
The other settings will be discussed under "Advanced".
For now leave them set to their defaults.
|
|
